Steps to Remove Grease Stains from a Sweatshirt

Grease stains can be persistent, especially after washing and ironing, but don’t worry — there are still effective ways to tackle the stain even after the initial washing and ironing. Since you’ve already used brown paper and ironed the stain, it sounds like you’ve tried to lift some of the grease, but it’s still lingering. Here’s a step-by-step guide to remove that stubborn grease stain:

1. Pre-Treat the Stain with Dish Soap (or Degreaser)

Dish soap is designed to break down grease and oil, making it one of the most effective solutions for grease stains. If the stain has been set by heat (like from ironing), this step is crucial.

• What you’ll need:
  • Liquid dish soap (preferably a degreasing one like Dawn or Fairy)
  • Warm water
  • A soft toothbrush or a cloth
• How to do it:
  1. Apply the dish soap directly onto the grease stain. Use about a teaspoon or so, depending on the size of the stain.
  2. Gently rub the soap into the fabric using your fingers or a soft toothbrush to help lift the grease. Be careful not to damage the fabric with excessive scrubbing.
  3. Let the dish soap sit on the stain for about 10-15 minutes. If the stain is particularly stubborn, you can let it sit longer, but don’t let it dry out.

2. Rinse and Check the Stain

After the dish soap has had time to work:

• Rinse the stained area with warm water to remove the dish soap.
• Inspect the stain. If the stain has lightened significantly, but not fully removed, repeat the pre-treatment process. If the stain still appears very dark or prominent, proceed to the next step.

3. Try Baking Soda or Cornstarch for Extra Absorption

If the stain is still visible after the dish soap treatment, baking soda or cornstarch can help absorb any remaining grease. These powders will draw out oils and grease from the fabric.

• What you’ll need:
  • Baking soda or cornstarch
  • A soft brush or cloth
• How to do it:
  1. Sprinkle a generous amount of baking soda or cornstarch directly onto the stain.
  2. Let it sit for about 10-20 minutes to allow it to absorb the grease.
  3. Gently brush off the powder using a soft brush or cloth. You should see that a lot of the grease has been absorbed.

4. Wash the Sweatshirt Again

After pre-treating the stain, it’s time to wash the sweatshirt again:

• Use a heavy-duty detergent (preferably one designed for grease or oil removal).
• Set your washing machine to the warmest water temperature safe for the fabric (check the care label of the sweatshirt to ensure it’s safe).
• Add a stain remover (optional): You can add an oxygen bleach (like OxiClean) to the wash to help lift any remaining stains.
• Wash the sweatshirt as you normally would.

Continue reading in page 2