Your Ultimate Guide on Growing Persian Shield

Interesting Facts about Persian Shield

The Persian shield is a beautiful plant that thrives in the humid, warm environment of rainforests. The dark purple color on its leaves will make you want to reach out and touch them- it’s like an intricate piece from centuries ago!

Persian shield is a striking plant with succulent, iridescent leaves. Grows outdoors in USDA zones 10 and 11 where it can grow up to 4 feet tall (1-2 meters).

For most people the best way to enjoy their beauty indoors would be by growing this stunning specimen from seed – just like all plants!

The Royal Purple plant, Strobilanthes dyerianus is a beautiful tropical evergreen shrub with silvery armor-like leaves.

It originates in Myanmar, and its common names include Persian Shield due to how the plants’ branches shield themselves from sunlight by rolling up like an ancient warrior’s helmet (or perhaps even more fittingly after being compared with shields).

Other nicknames for this type are Burmuda coneflower or simply “the purple one.”

Persian Shield Plant Care Indoors

To care for Persian shield indoors, start with a rich and well-draining potting mix. Keep the soil moist but not soggy to avoid root rot in between watering.

For best results grow them away from direct sunlight exposure, as this plant prefers an average temperature range of 60 – 75 degrees Fahrenheit with high humidity levels above 80%.

Persian Shield Plant Care Outdoors

To grow a Persian shield plant in the ground, choose an area of your garden with dappled sunlight.

Plant it near or by water because they prefer rich soil that has good drainage and will need to stay moist at all times for germination! If growing as a tender perennial, you can bring them indoors when temperatures drop below 60°F.

Persian Shield Flower

One of the most exotic house plants, Persian shield produces insignificant spikes of lilac-colored funnel shaped flowers on short stems. The small 5 lobed flower has many blooms per stalk which are often found growing in one place due to their size and shape (the “cone”).

Growing indoors from burlap like roots is uncommon for this type or plant; however purple varieties do sometimes bloom during winter months when temperatures stay much lower than usual

Persian Shield Leaves

The most attractive feature about this plant is the purple Persian shield leaves. These lanceolate-shaped, iridescent sheen with a silver and dark under tone come in at lengths between 6″ – 8″. Hot conditions bring them out to their fullest potential.

Persian Shield Companion Plants

There are a lot of different colors in this world, but not many that can compete with the beauty and variety found within Persian Shield plants.

These ornamental vines make for great companion plants because they don’t just add flair to your landscaping – their dramatic appearance means these partners will be loved by all!

Here’s how some other popular companions pair up:

• Curcuma – Curcuma plants have beautiful flowers that can last for over a month. The long lasting colors contrast nicely with Persian’s shields, which are typically more intense in color but shorter-lasting.
• Gardenia – Gardenias are perfect for growing alongside a Persian shield. The plant has stunning white flowers and strong scents that will complement your home’s décor, making it hard to resist planting this beautiful flower in any garden!
• Impatiens – Impatiens are colorful and showy, with flowers that offer a bold contrast to dark purple leaves.
• Lobelia – The brilliant colors and patterns of lobelia make it one of the most visually stunning plants in any garden.

Planting Persian Shield

Persian shield plants grow as evergreen perennials or annuals, depending on the climate.

The dramatic purple foliage and relatively low growth height mean they are ideal for border or edging with their dramatic appeal; you can also use this type of plant in mixed beds to create a focal point that will draw attention from all angles!

Persian shields are great for adding color and flair to the garden. If you want an annual, it’s best grown in containers so that when cool weather comes around they can be brought inside!

Persian Shield Light Requirements

The Persian shield is an ornamental plant that likes plenty of light, as long it’s protected from direct sunlight.

Indoors you can keep the plant on a sunny windowsill if behind sheer curtains and in front or near east facing window with morning sun during summer months but give some shade between 2PM – 4 PM so this tropical vine has enough time to dry out before nightfall.

The Persian shield’s leaves grow in different colors depending on the light. If it has too much shade, then they become leggy and stretch toward any available source of illumination while not enough lighting can cause its silver shine to dull purple coloration over time.

Similarly, too much sunlight will bleach the dark colors on leaves. In time this can cause them to lose their iridescent purple hues.

Soil Requirements for Growing Persian Shield Plants

The Persian shield is a type of houseplant that needs rich, well draining soil to thrive. Combine peat moss with other ingredients like potting mix and perlite for the perfect conditions- including organic matter!

Growing a Persian shield plant indoors in pots requires good drainage. You can add perlite, gravel or horticultural sand to allow water to drain freely and give your roots plenty of air for growth!

Watering Requirements for Persian Shield House Plants

Watering a shield plant is easy to do and will keep the soil moist at all times. In order for this technique work, you must water your potted Persianas as often or twice per week; if indoors in warmer weather wait until top layer dries before watering again (this should be happening about once per week).

For cooler seasons such as winter then try watering less frequently than normal so that they don’t get too dry without proper care.

It’s time to water the plant when its leaves become droopy. However, let it dry as little as possible so that you don’t stress out your potted Persian Shield!

It’s best if you use room temperature filtered water and pour enough until all excess has drained from drainage holes before replacing on saucer or tray.

Here’s how often to water your Persian shield houseplant:

Watering requirements for potted plants in the shade are lower than those growing under normal light, so you may only need to do it every other day or less if they’re happy with their moisture levels and soil texture (which is different from pot size).

In contrast plastic pots take longer because there’s no evaporation happening.

PRO tip: Avoid splashing water on the leaves as this may cause leaf spotting.

Watering Requirements for In-Ground Persian Shield Plants

Persian shield plants, also known as bush fever or purple pimpernels need to be grown in moist ground.

It is important for these shrubs to have consistent watering and mulching around their roots so it can help keep them healthy during warm winters, when less moisture may otherwise occur naturally, due temperatures not being cold enough at night time (zone 10).

Purple Shield Temperature Range

Purple Shield thrives in average room temperatures between 60°F and 75°F (16°C – 24 ° C). Warm temperature keep the plant growing well, while cool or cold conditions will cause it’s leaf coloration to begin fading quickly.

The royal purple houseplant can tolerate ranges from 50-55 degrees Fahrenheit with minimal damage but should not be below 40 F on any long term basis.

Be mindful of the temperature when growing your plant. Avoid sudden fluctuations in order not to shock it, especially during summertime near drafty windows or an air conditioning vent, and during winter, you would want to avoid placing purple plants near hot radiators as they can burn up quickly if left unchecked.

The purple shield is a tender perennial that grows outdoors throughout the year in zones 10 and 11. The royal purple plant may survive warm years with proper care, but you should overwinter it indoors if your area’s temperatures are too cool for its liking!

Humidity Requirements for Purple Shield

The Persian shield thrives in high humidity, but it’s important to maintain the right kind for your environment. Humidity should be over 40% and there must always be moisture present indoors or else these plants will wilt.

The best way to ensure adequate humidity for a Persian shield is by sitting the potted bushy houseplant on its own pebble tray. Put in decorative stones and fill with water until it’s halfway up, then place plant right onto them!

The evaporating water creates humid conditions that will keep your plants healthy as can be.

How to Prune Persian Shield

The Persian shield is a beautiful plant that can be used in all sorts of ways. One way to keep this weed-like vegetable compact and bushy, cut off any leggy stems when it starts becoming unsightly during the spring or summer – just make sure you’re trimming back enough so new leaves will grow again after winter!

You’ll also want do this if your plants look elongated (or shoot) too much at around 30cm tall before the end of winter.

To pinch back the Persian shield, snip stems at an angle just above a leaf. Remember that these resilient plants can be pruned aggressively to keep growth full and bushy!

Persian Shield Plant Propagation

If you want to grow your own Persian shield, the best place for it is a stem cutting. Cut healthy stems about 2” or 3″ long (5 – 7.5 cm) and just below their node off with an sharp knife so that they can root easily in water.

Change daily but when 1-inch roots appear transfer them into potting soil where as new plants begin expanding on its branches!

After repotting the rooted stem, cover it with a plastic bag to seal in moisture and heat. Keep soil moist by misting regularly or keep pot out on deck until roots are established before putting back into its original location for growth (you can set smaller pots under trees if necessary).

After about two weeks of watering regularly you should start seeing new leaves emerging from their seedling buds!

Pests and Diseases that may Affect Persian Shield Plant

Strobilanthes dyerianus is a versatile plant that can grow outdoors, but it’s also deer and rabbit resistant. Indoors you might have problems with mealybugs or spider mites ruining your harvest; neem oil spray will get rid of these pests quickly!

Be on the lookout for these early signs of common houseplant pests and you might just prevent bugs, mites or other pesky creatures from becoming a major issue. It’s best to catch them before they wreak havoc in your plant!

The Persian shield is a tough plant to beat. Disease-free growth has been reported in this variety of succulents thanks largely due to their well-drained soil which allows for good air circulation so you don’t usually end up with pesky infections like powdery mildew on your hands.

Is Persian Shield Plant Poisonous?

Persian shield is a non-toxic plant that will not harm your pet.

Some people say there is mild skin irritation when sap from the stem gets in contact with them, but this doesn’t usually happen and if it does just wash off quickly for best results!